How to Cover a Lampshade With Wallpaper

 

Making lampshades is a terrific way to bring your own unique style to your home decor. You can use a variety of materials, including wallpaper. Because it is one of the most widely used and simple-to-use materials. But the question is, how can you put it to use?

According to a Brand Don Gaille report, custom interior design is a $10 billion industry in the United States. There are 60,000 professional interior designers. As a result, it’s clear that people enjoy adding a personal touch to their homes.

Making a lampshade out of wallpaper is the ideal activity for anyone who enjoys DIY crafts. It’s simple, enjoyable, and you can be as creative as you want.

However, using it correctly is tough. If you haven’t done any DIY projects before. That is why you should read this post. Because I demonstrated how to construct a lampshade out of wallpaper in this article.

Also, I have covered the cost of making the lampshade out of wallpaper. This will assist you in creating your budget.

Let’s Get This Party Started!

Section I: Table of Contents
How Much Does a Lampshade Made of Wallpaper Cost?
Wallpaper is a form of paper that is used to cover and beautify walls. It is usually made of thin sheets of paper that are glued to the wall with starch or paste.

That is why creating Lampshade out of wallpaper is fantastic. Because it is a low-cost and simple approach to cover a vast area. The cost of a lampshade made of wallpaper, on the other hand, is determined by the size and style of the lampshade, as well as the type of wallpaper utilised.

In general, however, you can anticipate to spend between $30 and $100 on materials alone. The expense of hiring someone to do the work for you will be much higher.

Making your own lampshade out of wallpaper, on the other hand, is a terrific way to save money while also being creative. With a little time and effort, you can make a gorgeous and one-of-a-kind lampshade that will bring character to any space in your home.

Making A Lampshade Out Of Wallpaper: A Step-by-Step Guide
Making lampshades is a terrific way to repurpose old wallpaper and give your home a new look. Plus, it’s a simple DIY project that anyone can complete! Here’s a step-by-step tutorial for designing your own wallpaper lampshade:
1. Select the wallpaper that you want to use.
Wallpaper is available in a variety of retailers, both online and offline. When you’ve decided on the ideal design, it’s time to get started on your project.

So, the first step is to select the wallpaper for your lampshade. You can use leftover wallpaper from a prior project or buy fresh wallpaper just for this job.

If you’re going to use leftover wallpaper, ensure sure it’s in good condition with no tears or damage. You’ll also want to be sure the design is one you like and will go well with the rest of your home’s decor.

But what kind of wallpaper may you use?

You should use heavyweight wallpaper for this project. This style of wallpaper is more robust and will last longer. When you work with it, it is also less likely to shred or tear.
2. Cut it to the size and shape of your lamp shade.
After you’ve decided on the wallpaper, it’s time to cut it to size. Begin by measuring the circumference of your lampshade and adding a few inches to that figure.

Next, cut the wallpaper to the required width with a straight edge. The wallpaper should then be clipped to the appropriate length. The length of your lampshade will be determined by its size and shape.

If you’re unsure how long the wallpaper should be, start by cutting it a few inches longer than you think you’ll need. If required, you can easily clip it down afterwards. Alternatively, if you want to be extra cautious, cut the wallpaper in half and work with one half at a time.
But be careful not to cut the wallpaper too short! You don’t want to end up with a too-small lampshade.

That’s why it’s best to err on the side of caution and cut the wallpaper a little longer than necessary.

3. Use a thin layer of Mod Podge to seal the surface.
Mod Podge is a decoupage medium that can be used to adhere paper to many different surfaces. It’s a glue that dries clear and leaves a long-lasting, water-resistant finish.

Apply a thin layer of Mod Podge to the back of the wallpaper now. Begin by dabbing some Mod Podge on one end of the wallpaper. Then, spread it out evenly with your finger or a brush.

Continue doing this until the entire back of the wallpaper is covered with a thin layer of Mod Podge. However, do not use it; otherwise, the wallpaper will get excessively moist and wrinkled. As a result, the Mod Podge will take longer to dry and will be more difficult to work with.
4. Stick the wallpaper on the lamp shade frame.
A lampshade frame is the basic framework on which your lampshade will be attached. There are other sorts of frames available, but for this project, you should use a wireframe or the one you already have.
It’s time to put your wallpaper and lampshade frame together now that you have them. On begin, apply a small coating of glue to the back of the wallpaper.

Make certain that you cover the entire surface. In order for the paper to adhere uniformly to the frame. Then, carefully place the wallpaper onto the frame, smoothing out any bubbles with your hand.
Because you’re working with a curved surface, any bubbles will be more visible. Once the entire frame has been covered, allow it to cure for at least an hour or two.

Allowing it to dry completely is critical to ensuring that your lampshade looks its best. If you’re in a hurry, you may speed up the procedure by using a hairdryer. However, don’t go overboard or you’ll harm the wallpaper.

5. Remove any extra wallpaper
After the glue has cured, cut away any excess wallpaper. This can be accomplished using a sharp pair of scissors or a utility knife. Just be cautious not to harm the frame.

When clipping surplus wallpaper from a lampshade, there are various potential issues. If you’re not careful, you could get uneven margins or even cuts in the wallpaper.
So take your time and be as accurate as possible. Turn the lampshade over and inspect it once again. Remove any loose threads or pieces of wallpaper that are protruding.

Check the seams as well to ensure they are all securely sealed. If not, you can secure them with glue or transparent tape.
Your lampshade is now ready to use! Simply replace the light bulb and enjoy your home’s fresh look.

However, there are a few things you should keep in mind before you do so. The first step is to ensure that the lampshade is totally dry before inserting a light bulb. Otherwise, there is a danger of fire.

6. Apply a coat or two of clear sealant spray to the surface.
Sealant spray is a spray adhesive that can be used to seal and protect a wide range of surfaces. It comes in a number of formulas, so study the label carefully to pick one that is wallpaper-compatible.

Because lampshades are frequently exposed to light, it is critical to seal the wallpaper to prevent fading over time.

Don’t worry, most hardware stores sell transparent sealer spray. Once you’ve selected the correct sealer spray, simply apply two sprays to the whole surface of the lampshade.
This will assist to keep dirt, dust, and other potential damage at bay. Apply a coat of sealant spray to the interior of the lampshade as well. This will aid in preventing the wallpaper from becoming loose over time.

7. Optional: Attach a heavy light bulb or string of lights.
Light bulbs are available in a wide range of shapes, sizes, and colours. They may also be highly attractive, making them an ideal complement to any lampshade. These bulbs also provide a lovely atmosphere in your room.
Furthermore, the string of lights is really gorgeous and may offer a one-of-a-kind touch to any lampshade. If you opt to incorporate either of these into your lampshade, make sure to seal the aperture with transparent tape to avoid any mishaps.

In addition, while adding a light bulb or string of lights to your lampshade, make sure to carefully follow all manufacturer’s directions. These, however, are entirely optional, and your lampshade will look just as lovely without them.

So your wallpaper lampshade is now ready to liven up your home! It will add flare and personality to any area, and it’s an excellent way to repurpose outdated wallpaper. Plus, it’s a simple DIY project that anyone can complete!!

5 Ways to Make a DIY Lampshade From Wallpaper
Making a lampshade out of wallpaper is a simple and fun way to personalise your space. Here are 5 pointers to assist you make a one-of-a-kind and attractive wallpaper lampshade:

Begin by cutting a piece of wallpaper slightly larger in size than your lampshade. Because you’ll be folding the wallpaper around the shade, make sure there’s enough of extra material to work with.
Using a template or plate as a guide, cut a circular hole in the centre of your wallpaper. This is where your lampshade will go. Also, before cutting, score the middle of your circle with a knife to ensure that the hole is even.
Tape the cut edges of your wallpaper to keep them from fraying. You might wish to use double-sided tape to keep the wallpaper flat.
Apply adhesive to the back side of your wallpaper and smooth it out thoroughly before attaching it to your lampshade frame. Be patient as the adhesive will take some time to dry.
As the fumes from the glue can be considerable, perform this work in a well-ventilated environment.
Finally, how can you make a lamp shade out of wallpaper?
Although building a DIY lampshade out of wallpaper may appear difficult, it is actually fairly straightforward and can be finished in just a few simple steps.

You can make a stunning and distinctive lampshade that will bring personality and beauty to any area in your home with a little time and work. If you don’t have the time or motivation to make your own wallpaper lampshade, you may always buy one that has already been constructed.

On the market, there are numerous unique and fashionable possibilities. However, if you want a truly unique lampshade, constructing your own is the way to go! Thank you for your time!
We hope you found this tutorial on how to construct a lampshade out of wallpaper useful. If you have any questions or recommendations, please leave them in the comments section below.

Is It Possible To Make A Lampshade Out Of Wallpaper?
Making a lampshade out of wallpaper might be a tricky task. As a result, you may encounter certain difficulties. So knowing suitable replies to issues that may irritate you is beneficial.

Q1. How Do You Calculate the Amount of Wallpaper Required for a Lampshade?
Ans: To estimate how much wallpaper you will need for a lampshade, first measure its circle and height. For example, if your shade has a circle of 30 inches and a height of 10 inches, you’ll need a 29-inch-wide-by-9-and-a-half-inch-tall strip of wallpaper.

Q2. What Should I Use for Wallpaper?
Ans: The wallpaper you use is entirely up to you. You can use any wallpaper you like as long as it is not too thick or tough to deal with. Self-adhesive vinyl wallpaper, fabric-backed vinyl wallpaper, and even traditional paper wallpaper are all viable possibilities.

Q3. What Is The Most Simple Way To Make A Lampshade Out Of Wallpaper?
Ans: Self-adhesive vinyl wallpaper is the simplest technique to manufacture a lampshade out of wallpaper. This style of wallpaper is simple to install and is available at most home improvement stores.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.