How to Fix HP Printer Ink System Failure

How to Fix HP Printer Ink System Failure?

 

 

This article will show you how to repair the Printer Failure problem on HP OfficeJet printers. Some users report that when they try to print something, the printer just does not print. It’s possible that the issue is with the ink system or the printer itself. On the printer control panel, the following problem notice appears:

Failure of the printer. There is an issue with the printer or the ink system. Turn the printer off and then back on. Contact HP if the problem persists.

Error Code HP Printer

Error HP Printer Failure

This post may be useful for individuals who own HP OfficeJet 6965, 276dw, 6964, 8650, 7612, 7510, 6963, 8616, 6100, 8625, 6700, 6960, 8610, 8615, 8600, 8640, 6961, 6970, 8630, 6974, 7110, 8100, 8620, 6600, 6962, 7512, 6975, 6968, 7

You should first try Windows Printer Troubleshooter to troubleshoot your problem before attempting any of the methods discussed in this page. If the printer failure error persists, try the following solutions:

Check for and remove any impediments in the carriage path.
Reboot the printer.
Maintain the printer.

1] Check for and remove any impediments in the carriage path.

The steps are as follows:

If the printer is switched off, turn it back on.
Remove the power cord from the printer’s back.
Open the carriage entrance door.
Examine the carriage for any paper fragments or other obstacles that may be causing the clog.
Remove any impediments.
Check that the carriage is moving freely on both sides (left and right). If the carriage is stalled on one side of the printer, look for the blockage, remove it, and then attempt moving the carriage again.
Shut the carriage access door.
Connect the power cord to the printer’s backside.
Start the printer.
This may resolve the issue.

 

Related: How to Repair HP Printer Error Code 0xc4eb827f

2] Reinstall the printer

If there is no problem with the carriage path and the problem remains, rebooting the printer may help. Follow these steps to accomplish this:

Start the printer.
Disconnect the power cord from the printer’s back end.
Remove the power cord from the power supply or wall outlet.
Take off the ink cartridge.
Wait 60 seconds.
Reconnect the power cord to the printer’s back end.
Connect the power cord to the power source or wall socket once more.
Start the printer.
Replace the ink cartridge.
Close the access door to the ink cartridges.

3] Maintain the printer

If none of the preceding alternatives work, your printer most likely needs service or replacement. Because of this:

Navigate to support.hp.com. For the Asia Pacific region, the page is automatically forwarded to the nearest service center.
On that page, select the Printer option.
Enter your printer’s serial number.
Click the Submit button.
Following that, you will be given contact information for more assistance so that you can schedule product service or replacement.

I hope this helps.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.