How To Install Vinyl Plank Flooring On Concrete


Following the selection of the best vinyl plank flooring for your home, the installation process begins.

This necessitates a step-by-step procedure. So even if you have no prior experience, you can easily complete it.

According to Statista, over 2.02 million marriages will take place in the United States alone in 2019.

That demonstrates how many people begin their home improvement journey.

This may appear absurd, but it is true. Because they were just kids before they married, not the man of the house.

But when they become, they have no idea how to do so. That is why, in this situation, they require information such as that contained in this article.

If you are one of them, you should read this entire article. Because in it I have described the step-by-step approach to install the vinyl plank flooring on the concrete surface.

I’ve also included some advantages to having vinyl plank flooring in your home.

This information will be very interesting, so don’t skip any steps. Otherwise, you will be unable to install vinyl plank flooring in your home.

But first, let’s go over the advantages.

Table of Contents Advantages of Vinyl Plank Flooring
If you have already installed hardwood flooring, you are aware of the issues. After laying vinyl plank flooring, this can be decreased or eliminated entirely.
Waterproof: It is normal to drop a glass of water on the floor. But if the floor surface is not waterproof then this will damage it. Especially when utilising hardwood floors without a water-resistant coating. The vinyl plank flooring, on the other hand, is entirely watertight. As a result, you will not observe this damage with your vinyl plank flooring.
Scratch Resistant: Do you live with pets? If this is the case, you may notice scratches on the floor or even the walls. Having cats is especially difficult because their nails are so long and they are natural scratchers. However, the majority of vinyl plank flooring is scratch-resistant.
Durable: If you want superior quality flooring, you usually have to invest a lot of money. However, if this just lasts 5 to 6 years, you will need to invest in it again. However, vinyl plank flooring can last up to 25 years, so there is no need to invest for a long period.
So you now have a better understanding of the advantages of vinyl plank flooring. Now is the moment to put it in your home.

Installing Vinyl Plank Flooring on Concrete: A Step-by-Step Guide
It is not necessary to have prior expertise installing vinyl plank flooring. You can complete your task without it by following this step-by-step procedure.

All you have to do is follow it and you’ll be fine.

1. Remove the baseboards
A baseboard, also known as a skirting board in home architecture, is a wooden element that covers the lowest section of your wall and floor.

Its primary function is to cover the joints throughout the home to prevent disconnection between the wall and the floor.
As a result, installing new flooring without first removing it is impossible. So, in the first step, use the utility knife and pry bar to remove the baseboard.

This is why you must cut through any seal that is holding the baseboard to the floor.

Then, to make room, slide the utility knife behind the baseboard. Finally, you must insert the pry bar into the space.
This must be done repeatedly until the baseboard is removed. However, you must proceed with caution because this technique has the potential to damage your wall.

2. Scrub the Floor’s Surface
Clean the floor surface as much as necessary before installing the vinyl plank flooring. Because this will prevent your work from being completed properly.

The dirt and dust will reduce friction between the flooring and the concrete. This necessitated reinstalling it.

As a result, without doing anything else, clean the floor surface with a vacuum or broom. This will collect all debris and clean the floor.

However, this is not enough; you must also perform another cleaning step using the soap and water mixture. Then thoroughly scrub the floor.
Don’t worry, any laundry detergent and warm water will suffice. Most stains on the floor surface will also be removed by this soapy water.
However, wear protective gear such as gloves, goggles, and so on. Because this is bad for your hand.

3. Fill the Gaps
Installing vinyl plank flooring without sealing gaps and cracks would diminish the efficacy of the flooring. Because dust and filth live in these cracks.
As they rise, friction decreases and all of the planks begin to slip. As a result, the interlocking between the planks has become loose.

As a result, you must first repair these fractures and gaps with concrete filler. Because this is the greatest solution for using on a concrete surface.

So get the bottle and place it against the cracks. Then, properly squeeze the filler into the cracks.

Fill it all the way to the top of the crack. Another option for filling these fractures is to use concrete patching material.
Simply apply patching material on the floor and wait for cracks to heal.

4. Determine the centre of your room.
Do you know where your house’s centre is? If you simply begin putting the vinyl plank without understanding it. You will not be successful.
Because if any part of your home is uneven, the vinyl plank will fit appropriately. I know this appears to be arduous work, but it is critical.

Especially if this is your first time installing flooring. Because the uneven spot was already repaired the second time.

To find this thing, indicate the centre of each wall and snap lines between them. But the question is, how do you do it?

This is pretty simple all you need simply use the chalk line. Then carefully snap it to the floor surface, being careful not to loosen the line.

Otherwise, you will not receive a straight line and will have to repeat the process.
5. Fill The Low Spot As you are aware, if you have any low spots in your home and are attempting to install vinyl plank flooring on them.

Then it will not fit well and you will notice some damage in the future. This necessitates the replacement of some of the vinyl planks.
As a result, your installation budget will be increased.

That is why I recommend that you mark the middle of your space. Because this will assist you in locating the lowest point in your home.

So, when you find it, fill it properly this time. You can apply a concrete levelling primer or something else. This can readily spread and cover the low spot.

To prepare for this, create this levelling primer. Don’t worry, this isn’t difficult.

All you need is a levelling compound mixture, which is easily available on the market. Then combine it with the warm water to complete the concoction.

6. Floor Surface Measurement
How big is your house? Where do you intend to put this vinyl plank flooring in your home? Assume you only want to cover a specific region rather than the full house.

The parts must then be ordered according to the area. If you are not familiar with mathematics, this may be confusing.
However, this is a relatively simple task that only requires a measuring tape. Then, make a note of the length and width of the area where you intend to put the vinyl plank flooring.

Assume you wish to install vinyl plank flooring throughout your home.

Then you must record the entire length and width of your home’s floor. This will assist you in limiting your budget and avoiding waste.

Typically, while investing in home remodelling, the budget can balloon and consume all of your funds.

7. Remove the first row’s tongue.
As you may know, vinyl plank flooring comes in two varieties: locking and adhesive.

Throughout the process, I discussed locking vinyl plank flooring. However, I also cover the adhesive one below. So there are two sides to the lock vinyl plank flooring.
The first is known as grooved, and the second as tongue side. The framework of vinyl plank flooring is formed by combining these two sides with other vinyl planks.
However, in the first row, you must cut the tongue side of your vinyl boards. In order for these vinyl planks to easily connect to the wall.

And achieve this, simply take a utility knife to carefully cut down the tongue side. Make careful to do this task with every last start row in your home.

Don’t worry, this is only about the work done to improve the locking system in vinyl plank flooring.

8. Begin by laying down the first row.
It is critical to install the first row of vinyl plank flooring in your home. Because this determines how effective the installation process is.
If you’ve seen the plank flooring’s interlocking structure. The attachment area is always in the centre of each vinyl board.

This will provide support to the attachment if the weight increases. The vinyl planks may also detach at this point.

However, when they are supported by another vinyl plank. This will never occur. I know this looks bad but this is wonderful.

That is why, after laying down the first row of planks in your house, you must cut the last of both boards in half.

So that when the second layer is installed, this will simply go into the centre of it. Don’t worry, I’ve also included instructions for installing the second row.

9. Add the Second Row
So, after you’ve installed your first row of vinyl plank flooring against the wall. This time, link the last second row.
Because this will assist you in determining what you should do when placing subsequent boards. As you may recall, I previously discussed the double sides of vinyl plank flooring.

The first links the front plank, and the second connects the backward plank. However, the opposite sides of your vinyl planks will have two more sides.

That is in charge of joining all of the planks in a certain row, such as the second row.

All you have to do is lay it down gently on the floor and hold it at an acceptable angle to connect it to the previous vinyl plank.

This locking system functions similarly to a puzzle, requiring all pieces to be placed precisely.

Install Under Door Jambs 10
The door jambs, also known as the door frames, are areas where you can easily install flooring. This place is conveniently accessible at the bottom of your door.
This will help you obtain a stronger grip on the floor. This, however, will throw off your criterion for locating the lowest point in your home.

That is why you must set aside some space for this work. Fixing the vinyl planks in this space isn’t difficult.

All you have to do is bend the panel and slip it into the jamb. If you don’t push it cautiously, the vinyl plank may be damaged.

As a result, you can utilise a wooden hammer for this task.

11. Replace the baseboard
As you are aware, the baseboard must be removed prior to laying the vinyl plank flooring.

However, this is a component of the flooring, and without it, your flooring will be incomplete. That is why, after successfully installing the vinyl plank flooring. The baseboard must then be reinstalled.

So that it can accommodate the first row of vinyl plank flooring. All you need is the same baseboard you removed previously.
Then properly nail it to the wall. So that the wall is not damaged. Otherwise, you would have to invest in it. After that, your work is finished.

Peel and Stick Vinyl Plank Flooring Installation
The majority of the steps for installing peel and stick plank flooring are the same. The only difference is how the locking vinyl plank is installed on the flooring.

However, in the peel and stick vinyl plank flooring, you must adhere it with other boards.

To access to the sticky component, you must first remove the rear paper. Then carefully place yourself on the concrete floor.

However, better cleaning is required. Otherwise, the adhesive will not perform as well.

Finally, here’s how to install vinyl plank flooring on concrete.
Vinyl plank flooring comes to mind when looking for a better water and scratch-proof surface. Because it outperforms the other flooring systems in the house.

However, the installation process is a little complicated, which is why I’ve supplied a step-by-step guide.

This will assist you on any surface, such as insulation or concrete. However, placing it on the insulation using peel and stick vinyl plank flooring is quite tough.

As a result, one of the greatest surfaces for putting vinyl plank flooring is a concrete surface.

Installing Vinyl Plank Flooring: A Step-by-Step Guide
It is tough to install vinyl plank flooring on a concrete surface. That is why many individuals, including yourself, are having difficulty.

That is a simple problem to fix. That is why I have included some of them in order to provide appropriate responses to them.

How Much Does Vinyl Plank Flooring Cost To Install On A Concrete Surface?
Installing vinyl plank flooring on a concrete surface is dependent on the quality and number of pieces used.

However, if you lack competence and wish to hire a professional for this work.

This will improve your budget, but it will still cost you between $1200 and $2500.

Is it possible to install other types of flooring on concrete surfaces?
Yes, there are alternatives to vinyl plank flooring, such as laminate and hardwood floors.

If you do not wish to have the vinyl plank flooring installed. You may then quickly install any of them.

However, the installation process is not the same for everyone.

Is it necessary to clean the concrete surface before installing vinyl plank flooring?
Yes, it is vital because if the concrete is not cleaned, you will encounter numerous difficulties, one of which is fiction.

Your vinyl plank flooring’s effectiveness will suffer as a result.


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: